Welcome To NetKnots.Com | The Most Trusted Knots On The Net.

Running Bowline

How to tie the Running Bowline Knot. The Running Bowline produces a noose or sliding loop. This can be useful for retrieving objects by throwing the open loop around them and the loop will tighten down on the object, as the standing line is pulled tight. The knot does not bind against the standing line and can be easily undone.

Scroll to see Animated Running Bowline Knot below the illustration and tying instructions.

Running Bowline

 

Running Bowline Knot Tying Instructions

  • Double the end of a rope and wrap tag end over then under standing line and up to side of new loop created.

  • Make a small loop on the topside of the original loop by twisting the line over itself.

  • Feed tag end through the small loop.

  • Wrap tag end once around topside of large loop and back down through small loop.

  • Pull tag end tight creating fixed loop that the main line can slip through.

 

Swiffy Output

Disclaimer: Any activity involving rope can be dangerous and may even be life threatening! Knot illustrations contained in this web site are not intended for rock climbing instruction. Many knots are not suitable for the risks involved in climbing. Where failure could cause property damage, injury, or death, seek professional instruction prior to use. Many factors affect knots including: the appropriateness of knots and rope materials used in particular applications, the age, size, and condition of ropes; and the accuracy with which these descriptions have been followed. No responsibility is accepted for incidents arising from the use of this content.